Pedal feels very good. I was pushing it sitting on a milk crate as my car is still half apart, so should be even easier with a proper seat. I would say on par with a fox mustang without the changing arc of the quandrant.
There is a slot in the firewall for a factory clutch rod (I believe), mine is an auto car so it had an oblong body plug. I drilled a hole in the plug and it was right in line with the fitting on the Malwood master.
The reservoir line I ran through a hole just below the main pinch weld, looped it down a bit and mounted the reservoir above the pinch weld. Clears the hood and Ross and Malwood said as long as the reservoir is higher than the master it will be fine, you could tie the hose in a knot and it would not matter.
When I get a second hand in the garage I will take a video of it in action, as well I will show the install and routing of the lines
