Slant six transplant ‘64 Barracuda

There's at least one more /6 pan...not shown
No this pan won't fit your car.
The rear sump pan shown is 70s/80s truck, I recently had an engine with a front sump out of a 64 pickup.

And OP I see you're listed as being from Savannah? RRR is by Macon. And member Marcus V is between Macon and Savannah, last I knew he had a 64/65ish valiant convertible..
I think that was a 273 car. Bit that was a few years ago, don't know if he still does.
He posts pretty rarely on here.
Mifht be some good parts/info sources for your car not too far from you....
I vaguely remember the lay of the land as I made that drive down interstate 16 a few years ago from I 75....
Good to know! There is alot of info on the web; some of it is spot on; some … not so much! I have found it’s better to verify before spending $$$! I can probably track down the correct early A pan and pick up tube … but if there was a newer style I could “luck into” when buying a motor/trans that just happen to work, I wouldn’t have complained! I have read that there are some gotchas about trying to bolt early cranks to newer 904 torque converters, so I was just hoping to find everything as a complete unit to avoid issues.