The fans only pull 8 amps, so I don't think I'll worry about them. If they actually do seem to be a problem, I'll pull the panel and isolate the power feed to that relay with a independent fussed feed.
The OEM fan fuses are a 40 amp and 50 amp based on the diagram I have, so I would be surprised if they only pull 8 amps. Can't remember an OEM fan that pulls so little. I bet the OEM wiring is 10 gage or bigger, too.
There is a 10 amp fuse for the control side of the relays, maybe that is what you are referring to?
