Alignment change after changing from drum to disc
Drum:
Looks like about 6 3/4 inches from center of zero on the ball joint to center of the tie rod hole.
Disc. Looks like the same number.
It appears to me that the difference is in the bend. I’d need to measure the offset of the arm from its mounting point on the spindle.
Drum:
Looks like about 6 3/4 inches from center of zero on the ball joint to center of the tie rod hole.
Disc. Looks like the same number.
It appears to me that the difference is in the bend. I’d need to measure the offset of the arm from its mounting point on the spindle.