Soft pedal after conversion.

That’s the master that I have from RPUI. 15/16 bore. Correct on the connections.

The only line that’s 1/4 is connected to the new master large reservoir feeding the oe junction block for the front calipers. All other lines are 3/16 to the calipers.

The 1/4 line was originally connected to the oe single reservoir master. All I did was twist it 90 , cut it and installed the correct fitting to attach to the new master.

RPUI said I may need a larger bore master. I disagree. Maybe switch to 7/8 bore?