I have 2 sets of the RT specialties clips BUT i have not used them yet. They look good though.
I'm sure you already figured out that the fender, door and quarter top trim has nuts on some of the ends. and when removing the plastic clips try to pull the centers out ( drill a small hole in the center pin and put a screw in it OR the pin will be inside your door, quarter panel etc and could rattle.
View attachment 1716357200
View attachment 1716357201
blue points to o ring
View attachment 1716357210
As for trunk trim, yes there are clips on the 4 pieces that hold the trunk full badge on plus the 4 screws that are pointed to in red.
View attachment 1716357188
I'm looking for a photo of the trunk trim clips I do not think they are reproduced.
Where the clips go (blue ignore red and blue squiggle)
View attachment 1716357191
this is what all but the 4 outer clips look like
View attachment 1716357192
Post #7
67 Dart GT trunk trim
rocker clips have a center part the gets spread apart GENTLY to release them from the body. They get squeezed to reattach them. I would put some Body sealer in, on and around the hole when reattaching them.
1967 Dodge Dart Gt clips
ATTN: 67 Dart GT Owners. NEW Rocker trim clips
67 Dart GT Rocker Trim Clip Substitute
As for fender top turn signal...
The signal is not reproduced that I know of BUT the lens is, so if you can find a good chrome part with a bad or missing lens you have an option.
hope you are sitting down...
this is drivers side but they are out there NOS and good used
1967 DODGE DART GT FENDER MOUNTED TURN SIGNALS | eBay
Turn Signal Indicator Lamp# 2606869 - LH - A - Body - Dodge Dart GT - 1967 - NOS - SHIPS FREE TO LOWER 48 - Blue Star Performance