D4B with leveling washers or late intake with leveling washers
Hi all,
Not an immediate project here, just thinking…
So I currently have a hipo 1967 273 in my 1965 dart. Stock single plane intake.
I have a D4B stashed away that I’m considering using on my currently installed motor. I’d likely use leveling washers like these to deal with angle differences.
https://www.mcmaster.com/product/91151A031
I think the bolt holes on mine are slightly oval already.
I don’t want to ditch the D4B because I have a 1964 273 also stashed away. I also like the idea of using the D4B because it’d be proper for the car.
Lots of potential conversation here. I really just want to see if anyone has actual pictures of using those leveling washers, or similar workarounds.
Pic of my D4B for fun.
Hi all,
Not an immediate project here, just thinking…
So I currently have a hipo 1967 273 in my 1965 dart. Stock single plane intake.
I have a D4B stashed away that I’m considering using on my currently installed motor. I’d likely use leveling washers like these to deal with angle differences.
https://www.mcmaster.com/product/91151A031
I think the bolt holes on mine are slightly oval already.
I don’t want to ditch the D4B because I have a 1964 273 also stashed away. I also like the idea of using the D4B because it’d be proper for the car.
Lots of potential conversation here. I really just want to see if anyone has actual pictures of using those leveling washers, or similar workarounds.
Pic of my D4B for fun.