67 Barracuda Front Sway Bar

I believe the K members should be stock for 67 Barracuda.
Now, we did replace the lower control arms when we installed the Wilwood front disc brake setup.
The spindles turned out to be from a 70 Volare.

As I have just begun to address the swaying issue, I did run her up the ramps to confirm I do not have a sway bar.
And, there is one mounting hole already on the lower control arms; for what I am not sure.
Anybody got a picture of where that mounting hole would be on the lower control arm for my 67 Barracuda?