67-69 Barracuda folding rear seat cams and levers
3 are required if you replace the inner one too. (they are all the same size)
This is what I measured off a good condition bushing I expect some dimensions might be wonky from 58 years of age
0.58 ID is a very loose fit to the cams like 0.020" over size
I have the CAD for them BUT store bought brass or nylon ones will work
3 are required if you replace the inner one too. (they are all the same size)
This is what I measured off a good condition bushing I expect some dimensions might be wonky from 58 years of age
0.58 ID is a very loose fit to the cams like 0.020" over size