Soft pedal first push

Hello friends. Back on the car today. Took out the brake pedal push rod bolt out to double check it's coming all the way out. Good to go oldmanmopar. Mv8 I swapped the port lines. Front to back, back to front. Vacumn pumped the entire system (2 quarts thru the system), manually bled the system ( 2 quarts). Same results. Looked up a rebuild kit for the 79 to 84 Eldorado caliper and it is a square seal nuts. Wife just pushed to pedal while I watched the caliper puck and there it was. Puck comes out around .080 (i measured it with a feeler gauge),touches the pad and the pedals hard. Pump the pedal quick twice, hard at the second push and holds. Have a stock distribution block not proportioning valve. So. Would appreciate suggestions. Residual valve back, what psi? Adjustable proportioning valve to the back. Thanks for all your suggestions!