1968 Barracuda Notch 340

Today I was successful at installing the wiper pivots ( assembled to connecting rods) with the complete instrument panel, column etc. in the way. Right side was easy, driver side not so much. The fuse box needed to be unbolted and the Speedo cable detach. When reattaching the ( new) Speedo cable I broke the retaining clip off. Anyway, to get the driver side pivot in I had to hold it in place at an angle due to instrument panel then start jamming the cowl seal into the hole bit by bit with a long screw driver. The original wiper arms are in great shape, just need to scare up the wiper frames/ blades