8.75 Spring perch Relocation Measurements

I'm guessing you bought new spring perches for your guy to weld to the axle tubes for relocation. He will have to sacrifice the old ones to keep from damaging the axle tubes when he removes them. Be sure to tell him to check the hole diameter in the new perches in comparison to the locator pins in the springs. All of the spring perches from Mopar Performance have holes that are too big for stock pins and need a bushing made and welded in before putting the perches on the axle. If the holes in the perches aren't tight to the pins, the axle can shift cockeyed a little and cause problems. Just wanted to give you a heads up if you had never experienced that situation.

:thumbsup: