Shifter for 727 within console

I put a '70 Cuda slapstick in my Demon. Works good.

Had to:
Drill a new hole in the upper bell crank where the shifter handle rod connects.
Move the console ahead to allow the shifter to go into park without hitting the console.
Enlarge the hole in the shifter slot plastic.
Grind a portion off the rear shifter bracket to allow the shifter slot plastic to slide.
Trimmed the chrome guide on the underside of the console to allow the slot plastic to slide.

Thanks to @Jim Lusk for the guidance on this mod :thumbsup: