Want to share another mod i made for the racing, street non purist folks. Choke cable controlled hinged front license plate air intake. Cut out the front bumper, leave the bottom 3/4 inch on the bottom, behind the license plate. Stainless piano hinge (12 lowes), choke cable assembly with brackets and hardware (17 oriellys). Adds tons of air flow to the radiator and would benefit intercooler. Pull the cable, plate closes. Push the cable, plate opens. Almost half of the radiator is blocked by the bumper. Cable is routed thru the firewall insulation board retaing plastic pin hole. Also. You can run an electric water pump with out the water pump cover, pump on the street. Using a thermostat with the valve cut out as a restrictor. Even in florida traffic i rarely see 210 otherwise 180 all the time. I also use the jegs racing antifreeze. FYI.
View attachment 1716404264
View attachment 1716404265
View attachment 1716404266
View attachment 1716404267
View attachment 1716404268
View attachment 1716404269
View attachment 1716404270