Thank you :thankyou: It's still kind of in the rough stages~ I ordered this kit from Speedway and thought sure 10 would go along the pathway of the drivers door~ so had to choose the only logical path, sure wasn't going under the car.
The ground cable will go through the firewall via a regular grommet and bolted to the block and there can be a short ground from the block to the chassis.
Where the two cables hit the back seat metal part, I'll put grommets there and go through the metal part. I'll be laying down some jute? stuff to surround the two cables in their path, then secure with duct tape to prevent wire/cable movement.
View attachment 1716408052
carpet should conceal these and with the dash in place should be unnoticed. Just to the left of the firewall connector will be the starter relay. Its not there yet obviously ;)
View attachment 1716408053
Haven't bolted the battery tray down yet. I will install a cutoff switch somewhere, also looking into mounting a solenoid , but haven't figured it out yet, don't really want an arcing problem.
View attachment 1716408054
Thank you!!!