Reading plugs

Wow, need to think positive guys, and no, not positive I will wipe the cam. lol
I agree with not letting it idle, and pull in rpm. I have read a lot of cam break in procedures, and find that most every one has the same recommendations of varying rpm. Most of them 20-30 minutes, 2-3k. I won't blame the cam or lifter manufacturer if it does wipe. I will inspect the lifters and lobes to see if there are any indications of non-rotation. I measured the crown of the lifters and cam lobe taper at first assembly. Crown was .0015 to .002, and taper was .0015.
Going to use a new filter and replace the break in oil for the next attempt. Any sure fire recommendations for the oil or additives? They all claim to be best.
I will follow up.
Thanks for the interest, I always appreciate good advice.