Another DCR/quench/cam overlap triangle question

Thank you guys for doing some legwork for me. I went to go Thank you guys for doing some legwork for me. I went to gofastmath.comfastmath.com and use their calculator instead of the Wallace calculator. I came up with 10.571 static compression ratio and 8.95 to one dynamic. This formula didn’t give me a cranking PSI, however, it would seem to be right on the ragged edge of pump gas. Since we seem to have landed in the basic area of where the static and dynamic compression ratio is, I’ll degree in the cam and see where it falls and report back. In theory, I should be able to retard the cam timing to lower the dynamic compression ratio, but I’ll see where the cam falls straight up and report back. Heading out of town so I probably won’t get to this until Monday. Thanks again for all the input!