69 Dart Hood Question
Here are the hood seal mounting hole locations and measurements.
The holes are 3/16" diameter and located 7/8" from the hood side of the brace.
You SHOULD be able to hold the hood seal in place and mark the holes from it.
From the hood center line going left and or right the measurements are as follows:
|<--5 7/8"-->|<--7 1/2"-->|<--7 1/2"-->|<--4 1/2"-->C/L<--4 1/2"-->|<--7 1/2"-->|<--7 1/2"-->|<--5 7/8"-->|
See attached photos.
Zoom in on the first photo for the measurements.
Hope this helps.
This hood seal is one of the most important parts of the cooling system. It keeps the hot engine bay air from being drawn back over the top of the radiator core support and being recirculated through the radiator.
I fought cooling issues for years. I put this seal BACK in place and resolved the issue.
Here are the hood seal mounting hole locations and measurements.
The holes are 3/16" diameter and located 7/8" from the hood side of the brace.
You SHOULD be able to hold the hood seal in place and mark the holes from it.
From the hood center line going left and or right the measurements are as follows:
|<--5 7/8"-->|<--7 1/2"-->|<--7 1/2"-->|<--4 1/2"-->C/L<--4 1/2"-->|<--7 1/2"-->|<--7 1/2"-->|<--5 7/8"-->|
See attached photos.
Zoom in on the first photo for the measurements.
Hope this helps.
This hood seal is one of the most important parts of the cooling system. It keeps the hot engine bay air from being drawn back over the top of the radiator core support and being recirculated through the radiator.
I fought cooling issues for years. I put this seal BACK in place and resolved the issue.