Brake Issue

Inertia said

If there is no fluid loss from the reservoir, the fluid level isn't dropping, but pedal goes to floor, I'd be looking at the Master.
Make sure pedal pushrod is adjusted to allow the m/c piston to fully return to its stop .

Nice work at the track,
Good luck .

PS, was this round-robin ?

Click to expand...

No loss of fluid. When I took the cover off the MC this morning to check the level both sides were full. Pedal pushrod adjustment is correct.
No, it wasn’t round, but I didn’t have much time between rounds as the run order was Box, No Box then Gassah Guys, followed by the other classes being run.

Thank you, it was the best weekend of racing that I’ve had in a while.