Hey all, have troubleshot my cooling issues down to the radiator. Currently have a Proform 26” with single electric fan that came in the car with a 360LA, now have a 440. 69 Dart, plans of 550HP, 100% weekend street car, not a daily, not a drag car.
Biggest hurdle is I have 5.25” of room between my support and my water pump pulley. Also my power steering pulley may be an issue.
Cold Case-26”, two row, two 1.25” tubes. But 6.75” with their dual fan and shroud setup. Didn’t give any options on the phone just said it wouldn’t work and that’s it.
ECP-26”, two row, two 1.25” tubes. Not sure on depth, guy I spoke with plain said no where near enough room. He recommended a 16” 3,000cfm Spal pusher fan.
Champion-three row, three .75” tubes. Their dual 12” Spal fans, 3,000 cfm total with shroud will bolt in with my setup, 4.75” deep at the pulley area. Guy was super helpful on the phone too.
Have read that the 2 row 1.25” are the best but I can’t find any fan/shroud setups to work with the 5.25” I have and stay under $800. Leaning towards Champion right now.
Any input would be appreciated.
View attachment 1716425254