1969 Barracuda Formula S Trunk Trim Panel Restoration

Pour fill badges,,, Testors' model enamel works great. Some hot thinner and a piece of dress shirt material. I position work as level as can and I have let the paint cure thicken a little b4 applying but it wont flow out as flat sometimes. After the stuff is about cured, a few drops of thinner in smooth fabric wrapped on a flat whatever, excess wipes right away. If this fabric did carry enough thinner to bleed into the pour, it should evaporate away, no harm done. What you have is a little different challenge. Shoot the black and slap it off the top in same manner should work. I've carefully applied liquid mask to little places similar but never liked it.