Cam ID/Application Help!

XFX said
Need some input on this cam. Seems to be from the early 80-s and is a white box clevite performance cam that outwardly looks similar to the mopar cam.

I never got into the mopar cams and the odd way they present the specs so this is why im needing help.

Not a shocker this 80-s cam even being a white boxer screams of quality in machine work vs many out of the box cams of today.

So is this close to the mopar cam? If not in what ways and what would the proper application be? I might have a use for this and ended up with a few from a friend who cleaned out an old napa building where they buyer was just chucking everything in a dumpster for melt down weight but we saved some of the mopar stuff.

Thank You for any input.

View attachment 1716431515

View attachment 1716431516

Yes, it's pretty close to the Mopar .508 cam. The .508 cam is 248.5 degrees @.050 where this cam is 243. But of course, it could be the same or bigger, depending on how the two are measured exactly. Mopar was very proprietary about how they got their numbers. Whatever engine you put that in better have at least 10:1 compression. If not, you'll need to advance it a good little bit.