Pair of Pro Comp PC3002 aluminum cylinder heads for the Gen 1 small block Chevy engines
I’m selling for a friend of mine, a pair of nice Pro Comp PC3002 aluminum cylinder heads for the Gen 1 small block Chevy engines. They are clean, have no issues that I can see and was told that they have a fresh valve job. My friend had them on a running 400 SB and took them off to put bigger port and bigger valve heads on. These heads have had at some point, about .003” taken off the block surface to make sure that they are flat. They come with Manley 2.02/1.60 +.200” longer valves along with the valve seals. The intake runners are 195 cc while the exhaust runners are 64 cc with a combustion chamber volume of 64 cc. They also come with 7/16 rocker studs and Procomp pushrod guide plates for 5/16 pushrods. These heads DO NOT come with valve springs, spring locators, spring retainers or keepers.
I would like to get $800.00 for the pair plus the shipping.
Ken
Edison, NJ
I’m selling for a friend of mine, a pair of nice Pro Comp PC3002 aluminum cylinder heads for the Gen 1 small block Chevy engines. They are clean, have no issues that I can see and was told that they have a fresh valve job. My friend had them on a running 400 SB and took them off to put bigger port and bigger valve heads on. These heads have had at some point, about .003” taken off the block surface to make sure that they are flat. They come with Manley 2.02/1.60 +.200” longer valves along with the valve seals. The intake runners are 195 cc while the exhaust runners are 64 cc with a combustion chamber volume of 64 cc. They also come with 7/16 rocker studs and Procomp pushrod guide plates for 5/16 pushrods. These heads DO NOT come with valve springs, spring locators, spring retainers or keepers.
I would like to get $800.00 for the pair plus the shipping.
Ken
Edison, NJ