Fine Tuning a 360 Magnum with a Brawler "Double Pumper"

MOPAROFFICIAL said

Can you real quick just list for me the spring you use, the installed height of that spring, the assumed preload of the lifter and cam lift/ lobe lift

Click to expand...

The cam is a Hughes SER0814ARL-14, with Hughes 5007 lifters, and the Hughes 1110P springs.

My assumed preload at the lifter is .126” (6.936”-6.810”), the lobe lift is .327” intake, .333” exhaust. At 1.6 ratio it is .523/.533”. The cam was installed straight up, but it has a 114 LSA and a 110 ICL so technically 4 degrees advanced. (It’s dot to dot on the gears).

The spring has an installed height of 1.660” @ 120 pounds.

If it makes anything simpler, I bought a cam kit that came with everything but the lifters. The kit is the Hughes 0814-K kit.