DOES THE HDK SUSPENSION K-MEMBER HANDLE BETTER THAN A T-BAR SUSPENSION?

I was just reading something on the book of faces regarding coil over swaps and the negative affects of additional weight on the front frame rails. I know everyone has heard it before. "The front of these cars weren't meant to handle all the weight. The torsion bar cross member is under the car to hold the weight." This is actually something I've thought about and at the time of my swap I really wished I had a set of scales so I could do before an after corner weights. But I don't have scales and life went on. Prior to the light bulb just going off as I read on FB, my stance was my car has thousands of street miles and hundreds of autocross runs on the HDK and not a single panel gap has changed and my car hasn't folded in half like all the armchair quarterbacks said it would. However, I have new information now as it relates to this. When I was at the CAM Challenge in St. Louis, @JBrian was there with his Gen 3 hemi swapped 71 Duster. He's running pretty much the same exact T-Bar setup I had prior to the swap. Part of the requirements at these national events is to weigh the cars to make sure they fit the rules. Guess what? Our front corners were damn near the same. In fact, our front right was exactly the same weight. So if the beloved torsion bar system transferred weight to the center of the car, how is it that our front weight was damn near identical? Let's get a little more finite. His car is 200lbs more than me (drivers in the cars) and all that weight showed up on the back of his car. However, he's got some stereo equipment and some other things that will generally add up to more weight. (I am still wondering where that 200lbs is though.) So I'll go ahead and give these people the benefit of the doubt and say the torsion bars are moving that weight to the rear tires. That equals 5% of the total weight of the car being moved to the back because of a t-bar. Perhaps, but I'm not convinced. 200lbs isn't going to fold the car in half because I don't have J bars.