66/67 A and B body Bucket seat frames and slides
Slides are 66 specific and only the upper 1/2.
Each set, #10, #11, #12, #13 is a left and right for one seat
(No way I was going to stick my hand in under a car on blocks for 50 years :eek: )
I have 3 of the same side and 1 of the opposite side. #10 & #11 would make a set.
#12 & #13 are the same as #11
All slides were hot tanked then media blasted and primed.
There is no grease on the bearings to not contaminate the paintabe surfaces.
All levers mode freely and the slides open and close as they should. The slides are very stiff with no lube but once painted and lubed will slide as expected.
All are in great shape with only the minimalist amount of pitting on #12 & #13 along the bottom most edge
During the cleaning process one large ball-bearing fell out and was lost, I bought Stainless Steel replacements and replaced it ( I don't know which slide it was but once the bolts and nuts are attached to the seat base the ball can no longer come out)
#10 (drivers)
---SOLD---
$20.00 plus shipping
#11 (passenger)
---SOLD---
$20.00 plus shipping
#12 (passenger)
$20.00 plus shipping
#13 (passenger)
$20.00 plus shipping
Slides are 66 specific and only the upper 1/2.
Each set, #10, #11, #12, #13 is a left and right for one seat
(No way I was going to stick my hand in under a car on blocks for 50 years :eek: )
I have 3 of the same side and 1 of the opposite side. #10 & #11 would make a set.
#12 & #13 are the same as #11
All slides were hot tanked then media blasted and primed.
There is no grease on the bearings to not contaminate the paintabe surfaces.
All levers mode freely and the slides open and close as they should. The slides are very stiff with no lube but once painted and lubed will slide as expected.
All are in great shape with only the minimalist amount of pitting on #12 & #13 along the bottom most edge
During the cleaning process one large ball-bearing fell out and was lost, I bought Stainless Steel replacements and replaced it ( I don't know which slide it was but once the bolts and nuts are attached to the seat base the ball can no longer come out)
#10 (drivers)
---SOLD---
$20.00 plus shipping
#11 (passenger)
---SOLD---
$20.00 plus shipping
#12 (passenger)
$20.00 plus shipping
#13 (passenger)
$20.00 plus shipping