I need hood scoop template for a Dodge Dart sport
If your scoop has studs, you can make your own template by pushing the studs down through a big sheet of cardboard, then tracing the outside of the scoop base on it as well. Cut out along the trace and always keep the same side "up".
OEM hoods had 4" holes in the corners of the "diamond" formed by the bracing but scoop is big enough to cut out the entire diamond on late a-bodies.
The layout of your early A-body underhood bracing is probably different and can have an influence of the scoop location and style of cut-out for fresh air. You may have to drill oversized access holes in the raised portions of the bracing to access the studs.
Check, measure & center often so you only have to drill once.
If your scoop has studs, you can make your own template by pushing the studs down through a big sheet of cardboard, then tracing the outside of the scoop base on it as well. Cut out along the trace and always keep the same side "up".
OEM hoods had 4" holes in the corners of the "diamond" formed by the bracing but scoop is big enough to cut out the entire diamond on late a-bodies.
The layout of your early A-body underhood bracing is probably different and can have an influence of the scoop location and style of cut-out for fresh air. You may have to drill oversized access holes in the raised portions of the bracing to access the studs.
Check, measure & center often so you only have to drill once.