66/67 A and B body Bucket seat frames and slides ---MOTIVATED---
Slides are 66 specific and only the upper 1/2.
Each set, #12, #13 is a left and right for one seat
(No way I was going to stick my hand in under a car on blocks for 50 years :eek: )
All slides were hot tanked then media blasted and primed.
There is no grease on the bearings to not contaminate the paintable surfaces.
All levers mode freely and the slides open and close as they should. The slides are stiff with no lube but once painted and lubed will slide as expected.
All are in great shape with only the minimalist amount of pitting on #12 & #13 along the bottom most edge
During the cleaning process one large ball-bearing fell out and was lost, I bought Stainless Steel replacements and replaced it (I don't know which slide it was but once the bolts and nuts are attached to the seat base the ball can no longer come out)
#12 (passenger)
$20.00 plus shipping
#13 (passenger)
$20.00 plus shipping
BTW... DID I SAY I WAS MOTIVATED
Slides are 66 specific and only the upper 1/2.
Each set, #12, #13 is a left and right for one seat
(No way I was going to stick my hand in under a car on blocks for 50 years :eek: )
All slides were hot tanked then media blasted and primed.
There is no grease on the bearings to not contaminate the paintable surfaces.
All levers mode freely and the slides open and close as they should. The slides are stiff with no lube but once painted and lubed will slide as expected.
All are in great shape with only the minimalist amount of pitting on #12 & #13 along the bottom most edge
During the cleaning process one large ball-bearing fell out and was lost, I bought Stainless Steel replacements and replaced it (I don't know which slide it was but once the bolts and nuts are attached to the seat base the ball can no longer come out)
#12 (passenger)
$20.00 plus shipping
#13 (passenger)
$20.00 plus shipping
BTW... DID I SAY I WAS MOTIVATED