rear sway bar recommendations

RustyRatRod said
I was happy with the hardware for the rear. The only thing I changed was to weld two 1/4" steel plates on the frame rails where the end links attach. I had read somewhere on here that the it was possible for the U bolts to pull through the frame rail. Not this white boy. Maybe you can see the plate the end link bracket is mounted to. I sprayed it all with undercoating.
View attachment 1716472088

Any mount thru the frame rails needs a piece of tubing( ID bolt sized)clear thru the frame rail & welded to frame rail. Heavier plate only might cause lighter rail sheet metal to crack next to weld. Doing both(with lighter plate) probably best to spread the load.