Future 360 cylinder head upgrade parts

The rockers stand in the Edelbrock heads will accept standard stock shafts and arms. Specifically, geometry changes per rocker shaft system used. All rockers are slightly different from each other and will have different geometry & probably pushrod length which can change with rocker, camshaft and lifter used.

@B3RE can help you out here very well. But only when you’re ready. He has custom kits to adjust what ever rocker set up you use to also work with the cam you choose.

Each time you make a change, camshaft valve lift, lifter, rocker arms, valve length/installed height, pushrods length must be checked.

Parts list;

After you have your cylinder heads and gaskets, you’ll need to choose rocker arms and then contact Mike, B3RE for a rocker arm geometry kit. Mike will walk you through the instructions you can find at his site if needed. Next is measure up pushrod length and order them up.