"Ram Air" 340 dual scoops?

ok guys here what i done its cheap,easy, and at the dragstrip showed a full tenth gain. first if you have an old 340,360,383, etc pie pan breather top that the bottom isn't real good your in reach you have the first piece. now around where the wingnut goes on there is a perfect circle raised up around it about 4-5 inches perfectly. cut out that circle and amazingingly it will perfectly fit where a beather bottom fits on the carb. like a glove. then summit or jegs one has a foam kit for the purpose of glueing around the outside of the breather top, its made for things like this, its about 1-2 inches wide and long enoungh to go around and have some left. some weatherstriping or all purpose glue works good. you may have to make the foam thinner depending on motor setup. then cut the hole in the hood under the hood scoop, make sure all lines up, shut the hood and bingo ram air all outside air which is coool goes threw the carb. o yeah you got to fix a small bracket off the carb stud to hold it down good. anyhow it works good for me just my idea i came up with, and its real cheap horsepower about 15-20 bucks. goodluck:toothy7: