Proportioning Valve

71DartGuy said

Cool. I may just leave it alone and see how it does. Any idea where I can get some new hard lines from the master to the prop valve? I kind of had to bend mine to get them to line up after putting the booster on- looks like a hack job and its driving me nuts!

Click to expand...

I bought a tubing bender at Advance Auto and it helped me not kink the line and also gave the line a nice clean bend to it. I measured each line and bought straight line that they have hanging in the back and then you have to bend it to fit. Just make sure you get the right fitting on each end of the line. I had to buy a 60" line and then add a 18" line in order to do the right wheel brake line done. That's the longest they had. If a line is to long bend a nice loop in it and then you can stretch it to fit just right and it looks stock. You probably won't have to do this but I used the old line and bent the new line just like the old line laying on the floor. It helped out a bunch.