Rallye Dash Demons -Help-

ok If you can figure out where these wires are in the standard harness main connecter these are the 3 to be moved to the smaller board.
Highest or closest to top of the 3 pins is for left signal indicater.
next pin down (middle one) is Illuminatin, where it is in the standard connecter I dunno but in the rallye harness main connecter the wire for illunation is at 7 o'clock position. You may notice on the rallye panel main board that that is feeding only 1 illumination bulb yet also feeds power to the park brake bulb that gets its ground from the switch.
The lowest of the 3 pins it sortof stands alone is for the high beam indicater lamp.
sure hope this helps