360 build recommendations please...

Adam, the head as choked off at about 215cfm. Put some heads that flow in the 235-240 range and it would likely be in the high 3's, 380-395 is my guess.

It's really a basic build and will have a 2500 stall, 904 and 3.23's with a short tire. We're guessing, hooking up and tuned right it should run really low 13's in the 104 range.

Its similar to the 360 I picked up with the Dart. Mines a 360 (72 block re manufactured by Mopar in 92) with an XE268, 302 casting heads with 1.88, 1.60 valves and a quick porting Job. It has a old Torker on it I may change at sme point to either a LD340 or RPM, and a 670 street avanger.

It should make great torque.