318 crankcase breather question

Just got the Dart I bought all dialed in with timing dwell and stuff but now need to figure out what to do with the crankcase breather.

When I bought the car the passenger side had a normal bretaher on it and it filled up with oil and was leaking on the valve cover.

I went and purchased a new breather with pcv valve on it and replaced it(The Napa guy gave me this set up because at that time i didnt know exactly what it needed. However I did not hook up the vacuum hose to the intake. Why? It does not have the stock air cleaner on it so I can't put it where it was suposed to go.

On the drivers side there is just a regular cap. I was looking through the service manual and noticed the cap is a breather into the air cleaner on the drivers side and on the passenger side there is just a pcv valve to the air cleaner.

Now with the new pcv valve and breather on the pass side it spews oil out the side and on to the exhaust manifold. Now I know I could plug the pcv valve with the a hose and plug but I want to make sure it works correctly.

Does anyone have an idea of what i should do to resolve this issue? I was hoping as I do not have to get the stock air cleaner assembly. Any thoughts you guy have would be great.

Thanks!