Head Gasket,Cracked head or hole in piston

Hi Benton, bummer by the way, if you're planning to go over the remaining pistons with a magnifying glass you really ought to look for minute cracks from the piston top edge down to the first and second ring land. I've seen catostrophic failures like that on new pistons from severe detonation or you may have got a couple bad pistons, but not likely. Can you get a close up shot of just the pistons, top and side view. Also can you take a closeup picture of the actual break of the piece that broke out, you'll need a good digital with macro setting for this.

Terry