desktop dyno guys.
I was wondering if you have time if you could run a few things through for me. I suck at this program. This is what i'm looking for
I need 3 senerios Run. had a long talk with a bunch of people online tonight, and one extrealy knowledgable woman. I need to know whats in my best interest to build
318 = 230hp stock
360 = 200hp stock
340 = 275hp stock
I don't have a 340. so This is what I need to check.
these combo's. if I miss anything, put a part in
1969 318 bored .030
Kieth black flat top pistions
Crane HMV-278-2 NC Cam <attached stats>
Edelbrock Performer Intake manifold
Heads <ported 360 heads>
and also check with
Heads 94 magnum. They are open and have a 1.6 lift with the rockers
________________________________________________________
1974 360 <standard Bore>
Kieth black flat top pistions
Crane HMV-278-2 NC Cam <attached stats>
Edelbrock Air Gap Intack Manifold
Heads Stock Magnum
_________________________________________________________
1994 Magnum 360 <standard Bore>
Kieth Black Flat Top pistons
mild roller cam <pick one >
Edelbrock Air Gap Intack Manifold
Stock Magnum Heads
_________________________________________________________
All of them running a set of hooker comp coated headers out of a 2 1/2 inch Flowmaster setup with H pipe
I was wondering if you have time if you could run a few things through for me. I suck at this program. This is what i'm looking for
I need 3 senerios Run. had a long talk with a bunch of people online tonight, and one extrealy knowledgable woman. I need to know whats in my best interest to build
318 = 230hp stock
360 = 200hp stock
340 = 275hp stock
I don't have a 340. so This is what I need to check.
these combo's. if I miss anything, put a part in
1969 318 bored .030
Kieth black flat top pistions
Crane HMV-278-2 NC Cam <attached stats>
Edelbrock Performer Intake manifold
Heads <ported 360 heads>
and also check with
Heads 94 magnum. They are open and have a 1.6 lift with the rockers
________________________________________________________
1974 360 <standard Bore>
Kieth black flat top pistions
Crane HMV-278-2 NC Cam <attached stats>
Edelbrock Air Gap Intack Manifold
Heads Stock Magnum
_________________________________________________________
1994 Magnum 360 <standard Bore>
Kieth Black Flat Top pistons
mild roller cam <pick one >
Edelbrock Air Gap Intack Manifold
Stock Magnum Heads
_________________________________________________________
All of them running a set of hooker comp coated headers out of a 2 1/2 inch Flowmaster setup with H pipe