dgc333 said

GotDart said

The 7-1/4 plates won't work. There is another thread about this here
http://www.forabodiesonly.com/forums/viewtopic.php?t=2787
and here
http://www.forabodiesonly.com/forums/viewtopic.php?t=2912

Click to expand...

The shock plates will work if you elongate the holes. The inside dimension on the 7.25 u-bolts is 2 1/2", on the 8.75 it's 3" so you will need to elongate the holes 1/4" to the outside on each side. Been there done that and it works just fine.

Also, don't forget you will need to shorten the drive shaft about 1 1/2".

Click to expand...