Redrilling For Larger Bolt Pattern

Been there and done all the leg work..Here is what I did..Had the axles sent out and had the holes filled and new ones drilled..I didn't use the Mopar wheel stud..Like mentioned there is very little meat left on the outer edge due to the large diameter of the knurl. What I did do was go through a wheel stud book and I found a stud that was the same length, pitch and was considerably smaller on the diameter than the Mopar one..The stud's application was for a '81 Oldsmobile station wagon...I brought the studs with me to the maching shop and they made the holes to fit..Cost for two axles drilled, filled and stuids pressed in 125.00 and the cost of the studs..2.00 each...Hope this helps