65 cuda 273 to 360 tranny hookup

The 3500 and 2500 are stall numbersfor after market converters. Headers are not an issue because the 273 has 360 heads on it. Thats another story from another earlier thread I had and reason for swapping to the 360. The 360 origionaly had a 2500 stall when I got it. As for the cam I have no info on it other than the #'s on the end. I put a post out earlier for help iding the cam but no help #940162. The motor is bored .040 over with pistons .035 out of the hole. Carb is a 650 holley. Intake will be either edelbrock performer or performer rpm, not sure. Gears are3.91SG. Thats about all the info I got. My thoughts are to just use the 2500 stall and hope tranny holds up. Thanks Mark