Replacing SBP Rotors
I don't have any pics of the hub (hat) and the rotor as one. The hub is held onto the rotor via the grooves on the wheels studs, it's just a press fit.
(This one I had to replace due to a dead lugnut that stripped some threads on the end)
In order to get them apart I used a tortch and heated the hell out of the stud and whacked the **** out of them with a hammer until they poped out. When I put them back togeather I set the studs in place with everything sitting on some 2x4's so not to damage anything then with a brass punch I drove the studs in to the back of the rotor and hub.
I ordered the new studs from Napa.
I don't have any pics of the hub (hat) and the rotor as one. The hub is held onto the rotor via the grooves on the wheels studs, it's just a press fit.
(This one I had to replace due to a dead lugnut that stripped some threads on the end)
In order to get them apart I used a tortch and heated the hell out of the stud and whacked the **** out of them with a hammer until they poped out. When I put them back togeather I set the studs in place with everything sitting on some 2x4's so not to damage anything then with a brass punch I drove the studs in to the back of the rotor and hub.
I ordered the new studs from Napa.