318 build. what would you do?

For my 318 I used Dual exhaust off the stock manifolds,
#302 heads,
Edelbrock LD4B intake, {Small ports made for the 273/ 318}
Edelbrock # 1406 Carb,
Mopar Performance Cam/Lifter set P4452759

Part Number: DCC-4452759
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,200-5,200
Intake Duration at 050 inch Lift: 221
Exhaust Duration at 050 inch Lift: 228
Duration at 050 inch Lift: 221 int./228 exh.
Advertised Intake Duration: 260
Advertised Exhaust Duration: 268
Advertised Duration: 260 int./268 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.430 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.450 in.
Valve Lift with Factory Rocker Arm Ratio: 0.430 int./0.450 exh. lift
Lobe Separation (degrees): 110


http://www.youtube.com/watch?v=Ud8mci4rjFU