Aluminum HV pump installed

ramcharger said
Wow, a lathe. Was it actually cast on center or did you have to do the rotate by hand, check clearance, etc. thing?

Good to know about the sealing surface of the pump. Who made it again? My memory sucks.

What was your impression of the machining quality on the Summit 727 pan? Good tip by the way in regards to draining.

Yea I just used a 4 jaw and kept tapping it around until I got a .002" runout on the face then skimmed .010 across it.

The pump and housing came from Mancini, your guess is as good as mine who's casting they were. I'm pretty sure the HV pump is a Milodon unit and all the gasket faces were mirror smooth, really nice work. http://chucker54.stores.yahoo.net/brbhigvolwat1.html

The Summit pan was real nice to, no problems, came with filter, gaskets, extension and all the bolts required.
http://store.summitracing.com/partd...922122+4294905607+4294905621+115&autoview=sku

Terry