Hydraulic Clutch

If it was mounted upside down I don't think you could bleed it. I don't remember the application for the slave but you could get it from NAPA. My first set up I was missing 1/32" to have the pressure plate releasing the clutch then I figure what dia of piston that I needed for the extra travel and went in the backcounter to find what was required and forgot to ask the application. I have a McLeod twin disc and it's a pleasure to drive. You have to be careful when setting up the linkage from the pedal to the master. It wasn't hard but you have to be careful as you don't want over or under travel plus you want to push in straight line as much as possible but to me it was well worth the effort I will never have it the old way.