74 Snakeskin Gold Dustbag
I re-attached the mount and carefully dropped the motor back down to see if the hole lined up. I couldn't get it all the way dow, so the mount came back off so I could trim the saddle a bit.
I took off about 3/8" from the inside corner of the front ear and 1/4" from the rear ear. I also notched out the bottom front corner of the opening between the ears.
I re-attached the mount and carefully dropped the motor back down to see if the hole lined up. I couldn't get it all the way dow, so the mount came back off so I could trim the saddle a bit.
I took off about 3/8" from the inside corner of the front ear and 1/4" from the rear ear. I also notched out the bottom front corner of the opening between the ears.
