swaybar question with 11 3/4 brakes

I installed the ADDCO front and rear swaybars from Just Suspension on mine. What a difference! I also have the '73 spindles conversion with the Unicast police/taxi rotors and a set of tubular upper control arms from Just Suspension. I would get the upper control arms from Firm Feel though, they come with the bushings and upper ball joint already installed. I used the small block front torsion bars and two right side SS springs in the rear with a 1" lowering block. Finished off the suspension with a set of Koni's, although the rear ones where a pain to install over the lower shock stud. I had to press out the stock steal sleeve to get them to fit.

The sway bar mount on the lower control arm attaches to the lower shock mount. It looks weaker than it actually is, and unless you have a dedicated track car, they are more than adequate for heavily spirited street and high speed mountain road carving.