727 Shifter Linkage Help

I'm lost at "torque shaft assembly". There is a linkage shaft that drops through a hole in the floor. It is supported at top. All it needs at the bottom is something with a hole for it to go through. The original had a plastic bushing to prevent a metal to metal noise but a piece of fuel hose forced onto the shaft works with a larger hole for it. There are bolts and or unused bolt holes there to work off of. I had to create my first one. Imagination and materials is all you need. Only tip is dont over do it. Engine torque or broke motor support can change your gears if there is no wiggle room.