Whats everone working on?

Well last Oct.2007 I bought a 74 duster and I removed everything under the car but the gas tank. The 318 I had rebuilt and used 360j heads. The trans 904 was rebuilt and a shift kit installed. I repalced the 7 1/4 with an original a body 8 3/4 rear end with a 489 case running a 3:55 gear. I refreshed the leaf springs ( added a leaf ). All new moog front end parts every bushing, ball joints and tie rods I replaced. Frame tied the car also sent to Rhode Island for a frame rail cap and welded it in also. Replaced all brake lines, master cyclinder, capilers,wheel cylinders and I put 11x2.5 rear brakes. All electrical components were replaced and I am now going to replace the wiring. I wire wheeled the under side and engine comparment and repainted it. So far she drives like a new grocery getter with a bit of rear wheel spin