i need help with my 70 dart

Hey adam, just wondering what your thinking of doing.

Here is a break down of big block expences....

$500-$2000 for big block engine ( $500 for a barely running stock 2 brl $2000 for a rebuilt with 4 brl,and other goodies) Your not guna want a 2 brl intake on it anyways, so even a stock motor and a purchase of a 4 brl intack and carb to bolt on will still cost around $1000
$180 for schumacker motor mounts
$200 for headers, or exhaust manifolds
$230 for 3 inch exhaust and muflers
$350 for auto tranny and drive shaft shortening
$1700-$2500 for big block bell housing, A body tranny, Clutch, Clutch linkage, and shifter, and shifter linkage. clutch pedal assembly
$300 for aluminum rad
$500 for Disc brake conversion
$1000 for 8 3/4 rear end
$500 for nickel and dimeing stuff ( because you are doing way more work than a small block install.

and I am sure I am missing some stuff. If you do it with a $1000 engine ( including carb and 4 brl) and an auto trans, your total would be around $4260

and if you go with the same engine but 4 spd, your total would be $5610-$6410

Sure you can not upgrade your brakes, but with the added weight of the big block, I wouldn't recomend it. and you can also ditch the diff, but your stock 7 1/4 diff will bust, and then your car won't go anywhere anymore

Oh, and you will also need a proper oil pan for another $50-$100, and possibly T bars, though I have heard that /6 bars are ok, also need frame conectors, and you might have problems with your stearing linkage. so you may have to buy new idler and pitman arms...and...and...

Don't want to rain on your parade. But I just want you to know all the expenses befor you take this poor car apart.

Keep us posted

Phil