Using points, no spark

I tried the ol' screwdriver in the wire, and there's definately no spark. This morning I put on a new condenser, but unfortunately there's still no spark. I checked the ballast resistor and it has power on both sides. I had a spare coil lying around so I tried that, too, but no luck. I also pulled the plugs to make sure they weren't fouled. I'll try cleaning the points, since that seems to be the least costly. If that doesn't work, I'll look for possible grounds and then move on to the timing.

As frustrating as this is, at least I'm learning some good troubleshooting for the future!

I'll send out another progress report this weekend.